Quick Answer: How High Should Your Forks Be When Driving Forklift?

When Travelling at what height should the load and fork arms be?

Lower the load so that its lowest point is 15 to 20 cm (6 to 8 inches) from the floor.

While traveling, keep the load at a safe travel height..

What will make the load more stable during travel?

When traveling with a load, always make sure to tilt the mast of the forklift backward so that the load will firmly place against the backrest to make it more secure during transport. By doing this, you move the center of gravity towards to rear of the forklift making it more secure when traveling.

Where is the center of gravity on a forklift?

One of the hardest things for lift truck operators to learn during training is how to maintain their center of gravity within their stability triangle. A forklift has a three-point suspension system. The points are found over both of the two load (front) wheels and midway between the rear wheels.

What happens when the load Centre is increased?

The weight capacity of a forklift attachment is tied to what is known as the Maximum Load Moment, which is when the load center distance increases, changing the weight distribution, and as a result, the amount of weight a truck can carry under those conditions.

How soon should repairs be made to a forklift?

The more you use your forklift, the more often you should have it serviced by a factory trained technician. A forklift that gets heavy use might require a forklift maintenance visit every 90 days.

When driving a forklift What height should the forks be?

6 to 10 inchesKeep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.

When traveling with empty forklift the forks should be in what position?

Adopt a stable position and make sure your feet are apart, with one leg slightly forward to maintain balance.

What should you do every time you park a forklift?

Select an area to park. Do not park in an unauthorized area. Do not block an aisle or exits. Follow your company’s parking procedures.Apply brake slowly and stop.Neutralize the controls.Set the parking brake.Turn off the ignition.If the truck is parked on an incline, block the wheels.

Where should the heaviest part of the load be?

The heaviest weight should be loaded as close to the masts as possible. Position the load in a way that will shorten the load center distance.

When picking up a load the forks should be?

The forks should be at least two-thirds the length of the load. The mast must be carefully tilted backward to stabilize the load. Ensure the load is secured before moving. Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack.

Where can I not park a forklift?

Post ‘No Parking’ Signs: Parked forklifts should not be blocking pedestrian routes, fire lanes, doorways, or access to first aid stations and eyewash stations. Additionally, forklifts should not be parked too close to refueling areas or anywhere near a source of heat/open flames.

Is it safe to drive a forklift backwards?

At Linde, health and safety also means comfort. “Drive backwards if the load obstructs your forward view; but use a rotating seat if you have one. Otherwise the frequent twisting will put excessive strain on your spine.” That, in brief, is the recommendation set out for drivers and operators.

Can a fully loaded forklift use its brakes to the maximum?

Another important aspect of speed limitations is safe braking distances which must be considered when planning out any forklift travel paths in the workplace. … A loaded forklift cannot be expected to stop at its maximum capabilities as the load itself can cause the forklift to tip or slide.

When traveling on a level surface the forks should be raised?

When traveling on a level surface, you should raise the forks about 12 inches with or without a load. Dock plates should be visually checked by the lift truck operator.

What position do you place the forks when parking your forklift?

Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.